(2,00mm) .0787" tcmd series tcmd?20?d?02.50?01 tcmd?08?d?02.50?01?r www.samtec.com type strip ?o = outside reverse 4 5 5 requires ?dxx 5 requires ?dxx 2" min. 4" minimum ?xx? 1/8" double row con nec tors outer most (end of as sem bly) no. pins per row overall length end op tion 01 other option ?05, ?08, ?10, ?12, ?13, ?15, ?17, ?20, ?22, ?25 (call for other sizes) 3 ?p ?xx? = position po lar iza tion ?rw = reverse wiring 1 01 02 specify ?xx? as position number. requires transfer end. only socket is polarized. not available with ?o, ?m, ?r, ?dxx or ?bxx 01 02 blue or black wire opposite position #1. (2,00) .0787 no. of positions x (2,00) .0787 + (4,00) .158 (5,08) .200 (1,00) .03937 (4,00) .158 01 (2,00) .0787 (3,05) .120 (0,50) .020 sq note: tcmd series assemblies are non-standard, non-returnable. *note: standard tcmd callout will not mate with smm, mms. must use gold plated callouts. see drawing on web. tcmd =terminal strip assembled length in inches (1/8") 2 inches minimum ??xx.xx? = assembled length =transfer end ?t = single end ?s = double end ?d f-210 transfer option leave blank for ?s and ?d end options. for ?t end option specify ??n? (socket has notch polarization) 2 ?b ?xx? = breakout ?xx? 5"max. 2"min. specify ?xx? as number of conductors to be broken out. breakout starts with number 1 lead indicated by brown wire or red stripe. shown on top side. mates with: smm*, mms* for complete speci? cations see www.samtec.com?tcmd insulator ma te ri al: black glass filled polyester terminal: phosphor bronze plating: sn over 50" (1,27m) ni wire: 28 awg 7/36 stranded, tinned, copper with gray pvc insulator current rating: 1a operating temp range: -40c to +105c rohs compliant: ye s ?m = middle reverse ?r = reversed ?sr = strain relief ?d ?xx? = daisy chain no. of positions x (2,00) .0787 + (7,874) .3100 specifications ??????????????????? ? high reliability idc header cable
|